Loading... Please wait...

2 Layer Instant Quote

  • Image 1
Price:
$1.00
Only supports a few types. Maximum file size: 500 MB
Quantity:


Product Description

2 Layer PCB Instant Quote

In terms of a custom printed circuit board, our 2 layer PCB Instant Quote is the fastest turn-time at the best price that we have to offer. For on-demand pricing and ordering for your next printed circuit board project, check out our self-service configurator. Simply select the desired quantity and the board dimensions, in square inches, to get started. (Example: a board with dimensions 2" x 2" equaling 4" square inches would select the "0-9" option.)

Please note that your 2 Layer PCB must meet the manufacturing specifications as outlined below.

Not finding what you're looking for? We'll generate a custom quote for you. Click here to get started!

Manufacturing Specifications

Quantity Customer Specified. Larger quantities are quoted here.
Layers 2 (or 1, if desired)
Lead Time 2 Business Days with an option to expedite to 1 Business Day (1 Day Sooner). To learn more about how lead time is calculated, read this.
Maximum Board Size Maximum board size must be less than 22.5 inches in height and 16.5 inches in width (maximum manufacturing capability).
Minimum Board Size Minimum dimension in height or width is 0.35 inches. Total board area must be greater than 0.4 square inches (i.e. smallest square board allowed is 0.64 x 0.64 inches).
Minimum Trace and Space Etching resolution is 0.005” minimum trace width, 0.005” minimum space width.
Inner Layers N/A. There are no inner layers for this product.
Soldermask Color = Green. Top and Bottom
Silkscreen Color = White. Top and Bottom
Surface Finish HASL (Lead), with option to upgrade to HASL (Lead Free), Immersion Silver, or Immersion Gold (ENIG). Learn more about Surface Finishes.
Soldermask Pad Tolerance Pads on the soldermask layers are grown by 0.003” on all sides. As a result, very fine pitch surface mount components may not include any soldermask between the pins.
Material Dielectric material is FR-4 with a glass transition temperature of 135 degrees Celsius. However, if a RoHS compliant surface finish is selected, then FR-4 with a glass transition temperature of 180 degrees Celsius will be used. Outer layers begin with 0.5 ounces of copper, then during through hole plating, up to 1 ounce of copper may be added to the outer layers. Thus, the total outer layer copper is between 0.0017" and 0.0021". If the board is 1 layer or does not have plated through holes, then the outer layer copper may be as low as 0.0014”, since less plating is required. The total board thickness will be 0.062".
Dielectric Constant The dielectric spacing 0.057” with a dielectric constant of 4.58 +/-0.2.
Plated Holes Boards are manufactured with 2 (or 1) copper layers. All holes with copper pads on the top and bottom are plated through, while holes without a copper pad on the top or bottom layer are non-plated.
Hole Sizes & Quantity All hole sizes between and including 0.010” and 0.247” are available, up to tolerance. Non-plated holes may be any size. Limit number of holes to less than 50 per square inch.
Hole Tolerance These sizes are the finished hole diameters after plating. Holes 0.014” or smaller may be filled with solder and can only be used as via. The tolerance of 0.015” to 0.020” holes is +0.003 / -0.005. The tolerance for the other hole sizes are +/-0.003”.
Hole Location Tolerance Hole location tolerance is +/-0.003”.
Minimum Hole Distance The distance between plated holes of different nets is dictated by annular rings and trace/space. Plated holes of the same net and non-plated holes should be at least 0.005” apart.
Internal Slots and Cutouts Allowed
Perimeter Slots Board perimeters are cut to shape using a 0.078” router bit. Slots in the perimeter must be 0.100” or wider. Narrower slots may not be cut correctly.
Perimeter Routing The edges of the board are cut with an accuracy of +/-0.010”. A minimum of 0.020” blank space is recommended between the perimeter and all features on the board. Traces placed closer than 0.010” to the board’s edge may be routed off.
Temperature All boards can survive standard reflow, while RoHS compliant boards are able to survive RoHS reflow. The maximum operating temperature is 125 degrees C.
Electrical Test Optional
Other Controlled Impedance, Blind/Buried Vias, Countersinks/Counterbores, Arrays, Scoring, and Beveled Edges are NOT available with this product option. When required, please request a custom quote here.

Additional Resources

Design Rules Our standard design rules and standards assist PCB Designers with configuring basic design rule checks. Available Here
DFM Report Upload your PCB design files and receive an instant Design for Manufacturability (DFM) report. Our free, automated tool identifies possible production issues prior to manufacturing. Available Here
PCB Design Software PCB Creator is a free, easy-to-use PCB design software allowing for the design of 2 and 4 layer PCBs. Available Here
Online Tools We offer a variety of free online tools to assist you in the PCB design and manufacturing process including an Array Calculator, a Panelizer Tool, Material Library, Surface Finish Chart & More. Available Here
Blog Follow our Blog for helpful posts on PCB design. Available Here
Help Center Questions? Check our Help Center for self-service answers to common questions, or Submit a Request and we’ll be glad to help out! Available Here


Write your own product review

Product Reviews

Showing reviews 1-5 of 10 | Next

  1. Great customer service and extremely fast turnaround at a fair price 5 Star Review

    Posted by on 31st Aug 2016

    If you needs to get your boards as soon as humanly possible you will not be disappointed. The employees will go out of their way to make sure that you get what you need, but they will also make sure that you are not overcharged unnecessarily.


  2. The Best 5 Star Review

    Posted by on 2nd Jun 2016

    Bay Area Circuits Meets These Criteria:
    1. Made in USA
    2. Willing to sign NDA
    3. BAC ships extras (if any) and doesn't keep any of your boards
    (#3 is important if you care about #2)
    4. No gold on the pads
    5. Slots are plated
    6. Experienced staff answers questions and detects errors
    7. Solder mask withstands heat abrasion
    8. Board edges are routed
    9. Fast turnaround
    10. Reasonable price
    11. Points system exists to save even more money
    12. Beautiful web site


  3. Beautiful boards 5 Star Review

    Posted by on 6th May 2016

    I just can't stop looking at it. It looks amazing. I've designed boards for work, but this was the first one I did for myself. Having amazing quality PCBs makes my own project look way more professional. The finish on both sides was really clean and I wasted no time soldering all the components. I couldn't be more happy and I'm looking forward to my next order that is already in the queue.
    The boards were done in 3 days which was sweet, but the cherry on top was two extra boards at no charge. Now I can make twice as many! Thanks!


  4. Very fast and clean 5 Star Review

    Posted by on 16th Mar 2016

    Feedback was great! They caught a small issue and emailed me right away.
    Got the boards quickly and they were very well done! Even came with E-test cert!
    My go-to house now.


  5. Great no-touch service 4 Star Review

    Posted by on 5th Oct 2015

    I'm extremely impressed with Bay Area Circuits price and turnaround on these boards. The process is truly no-touch, so just be sure to check your gerbers carefully before submitting.


Showing reviews 1-5 of 10 | Next