Loading... Please wait...

2 Layer Instant Quote

  • Image 1
Only supports a few types. Maximum file size: 500 MB

Product Description

2 Layer PCB Instant Quote

In terms of a custom printed circuit board, our 2 layer PCB Instant Quote is the fastest turn-time at the best price that we have to offer. For on-demand pricing and ordering for your next printed circuit board project, check out our self-service configurator. Simply select the desired quantity and the board dimensions, in square inches, to get started. (Example: a board with dimensions 2" x 2" equaling 4" square inches would select the "0-9" option.)

Please note that your 2 Layer PCB must meet the manufacturing specifications as outlined below.

Interested in a stencil to help with parts assembly? Check out our desktop stencil option here.

Not finding what you're looking for? We'll generate a custom quote for you. Click here to get started!

Manufacturing Specifications

Quantity Customer Specified. Larger quantities are quoted here.
Layers 2 (or 1, if desired)
Lead Time 2 Business Days with an option to expedite to 1 Business Day (1 Day Sooner). To learn more about how lead time is calculated, read this.
Maximum Board Size Maximum board dimension is 22.5 inches (maximum manufacturing capability).
Minimum Board Size Minimum dimension in height or width is 0.35 inches. Total board area must be greater than 0.4 square inches (i.e. smallest square board allowed is 0.64 x 0.64 inches).
Minimum Trace and Space Etching resolution is 0.005” minimum trace width, 0.005” minimum space width.
Inner Layers N/A. There are no inner layers for this product.
Soldermask Color = Green. Top and Bottom
Silkscreen Color = White. Top and Bottom
Surface Finish HASL (Lead), with option to upgrade to HASL (Lead Free), Immersion Silver, or Immersion Gold (ENIG). Learn more about Surface Finishes.
Soldermask Pad Tolerance Pads on the soldermask layers are grown by 0.003” on all sides. As a result, very fine pitch surface mount components may not include any soldermask between the pins.
Material Dielectric material is FR-4 with a glass transition temperature of 135 degrees Celsius. However, if a RoHS compliant surface finish is selected, then FR-4 with a glass transition temperature of 180 degrees Celsius will be used. Outer layers begin with 0.5 ounces of copper, then during through hole plating, up to 1 ounce of copper may be added to the outer layers. Thus, the total outer layer copper is between 0.0017" and 0.0021". If the board is 1 layer or does not have plated through holes, then the outer layer copper may be as low as 0.0014”, since less plating is required. The total board thickness will be 0.062".
Dielectric Constant The dielectric spacing 0.057” with a dielectric constant of 4.58 +/-0.2.
Annular Ring Minimum annular ring must be at 0.005” or greater.  Calculate annular ring by subtracting the diameter of the via hole from the diameter of the via pad and dividing by two.
Plated Holes Boards are manufactured with 2 (or 1) copper layers. All holes with copper pads on the top and bottom are plated through, while holes without a copper pad on the top or bottom layer are non-plated. Holes with a copper pad on one outer layer but not on the other are not accepted.
Hole Sizes & Quantity All hole sizes between and including 0.010” and 0.247” are available, up to tolerance. Non-plated holes may be any size. Limit number of holes to less than 50 per square inch.
Hole Tolerance These sizes are the finished hole diameters after plating. Holes 0.014” or smaller may be filled with solder and can only be used as via. The tolerance of 0.015” to 0.020” holes is +0.003 / -0.005. The tolerance for the other hole sizes are +/-0.003”.
Hole Location Tolerance Hole location tolerance is +/-0.003”.
Minimum Hole Distance The distance between plated holes of different nets is dictated by annular rings and trace/space. Plated holes of the same net and non-plated holes should be at least 0.005” apart.
Internal Slots and Cutouts Allowed
Perimeter Slots Board perimeters are cut to shape using a 0.078” router bit. Slots in the perimeter must be 0.100” or wider. Narrower slots may not be cut correctly.
Perimeter Routing The edges of the board are cut with an accuracy of +/-0.010”. A minimum of 0.020” blank space is recommended between the perimeter and all features on the board. Copper features, vias, and any other design element placed closer than 0.010” to the board’s edge may be routed off.
Temperature All boards can survive standard reflow, while RoHS compliant boards are able to survive RoHS reflow. The maximum operating temperature is 125 degrees C.
Electrical Test Optional
Other Arrays (Tab Rout, Breakaway Tabs, Mouse Bites, etc), Beveled Edges, Blind/Buried Vias, Castellated Edges, Countersinks/Counterbores, Controlled Impedance, Edge Plating, and Scoring are NOT available with this product option. When required, please request a custom quote here.

Additional Resources

Design Rules Our standard design rules and standards assist PCB Designers with configuring basic design rule checks. Available Here
DFM Report Upload your PCB design files and receive an instant Design for Manufacturability (DFM) report. Our free, automated tool identifies possible production issues prior to manufacturing. Available Here
PCB Design Software PCB Creator is a free, easy-to-use PCB design software allowing for the design of 2 and 4 layer PCBs. Available Here
Online Tools We offer a variety of free online tools to assist you in the PCB design and manufacturing process including an Array Calculator, a Panelizer Tool, Material Library, Surface Finish Chart & More. Available Here
Blog Follow our Blog for helpful posts on PCB design. Available Here
Help Center Questions? Check our Help Center for self-service answers to common questions, or Submit a Request and we’ll be glad to help out! Available Here

Write your own product review

Product Reviews

Previous | Showing reviews 11-15 of 17 | Next

  1. Very fast and clean 5 Star Review

    Posted by on 16th Mar 2016

    Feedback was great! They caught a small issue and emailed me right away.
    Got the boards quickly and they were very well done! Even came with E-test cert!
    My go-to house now.

  2. Great no-touch service 4 Star Review

    Posted by on 5th Oct 2015

    I'm extremely impressed with Bay Area Circuits price and turnaround on these boards. The process is truly no-touch, so just be sure to check your gerbers carefully before submitting.

  3. Ultrafast and exactly to specification! 5 Star Review

    Posted by on 4th Apr 2015

    I have used a lot of board houses in the US and overseas, Bay Area Circuits is by far the best. They have instant quotes for 2 and 4 layer boards, lightning fast PCB manufacture, and deliver exactly what you expect.

  4. Quality boards, fast turnaround 5 Star Review

    Posted by on 19th Jan 2015

    High quality boards for excellent price. I sent a relatively simple design, just to see what quality was going to be like. I ordered / paid for 2 boards, but received 6. I would not expect a bonus like this all the time - maybe 6 would fit onto the stock they had? Regardless, I will be back for much larger projects, and a few projects for home as well. Software was mostly alright - the manual is not complete, and the statements that end with "?" look to be issues that were never resolved with certainty. I'm having a hard time understanding the library situation, but I'll get it eventually. Overall, great product at a great price. Would higly recomend.

  5. Solid 5 Star Review

    Posted by on 1st Apr 2014

    Always a high quality product from BAC.

Previous | Showing reviews 11-15 of 17 | Next