Loading... Please wait...

6 Layer Instant Quote

  • Image 1
Price:
$1.00
Only supports a few types. Maximum file size: 500 MB
Quantity:


Product Description

6 Layer PCB Instant Quote

In terms of a custom printed circuit board, our 6 layer PCB Instant Quote is the fastest turn-time at the best price that we have to offer. For on-demand pricing and ordering for your next printed circuit board project, check out our self-service configurator. Simply select the desired quantity and the board dimensions, in square inches, to get started. (Example: a board with dimensions 2" x 2" equaling 4" square inches would select the "0-9" option.)

Please note that your 6 Layer PCB must meet the manufacturing specifications as outlined below.

Not finding what you're looking for? We'll generate a custom quote for you. Click here to get started!

Manufacturing Specifications

Quantity Customer Specified. Larger quantities are quoted here.
Layers 6
Lead Time 3 Business Days with an option to expedite to 2 Business Days (1 Day Sooner). To learn more about how lead time is calculated, read this.
Maximum Board Size Maximum board size must be less than 22.5 inches in height and 16.5 inches in width (maximum manufacturing capability).
Minimum Board Size Minimum dimension in height or width is 0.35 inches. Total board area must be greater than 0.4 square inches (i.e. smallest square board allowed is 0.64 x 0.64 inches).
Minimum Trace and Space Etching resolution is 0.005” minimum trace width, 0.005” minimum space width.
Inner Layers The four inner layers may be solid copper planes, signal layers, or a mix of solid copper and signal traces. Through-hole pads can either be connected to or isolated from these layers. It’s recommended that layers 2 and 5 have roughly the same distribution of copper features to prevent warpage. For the same reason, layers 3 and 4 should also have roughly the same distribution of copper. The planes are inset 0.025” from each edge of the board.
Soldermask Color = Green. Top and Bottom
Silkscreen Color = White. Top and Bottom
Surface Finish HASL (Lead), with option to upgrade to HASL (Lead Free), Immersion Silver, or Immersion Gold (ENIG). Learn more about Surface Finishes.
Soldermask Pad Tolerance Pads on the soldermask layers are grown by 0.003” on all sides. As a result, very fine pitch surface mount components may not include any soldermask between the pins.
Material Dielectric material is FR-4 with a glass transition temperature of 180 degrees Celsius. Inner layer copper is 1 ounce (0.0014") thick. Outer layers begin with 0.5 ounces of copper, then during through hole plating, up to 1 ounce of copper may be added to the outer layers. Thus, the total outer layer copper is between 0.0017" and 0.0021". The total board thickness will be 0.062".
Dielectric Constant The dielectric constant is 4.2 +/-0.2. For dielectric spacing, please see our .062 / 6 Layer stackup here.
Plated Holes Boards are manufactured with 6 copper layers. All holes with copper pads on the top and bottom are plated through, while holes without a copper pad on the top or bottom layer are non-plated.
Hole Sizes & Quantity All hole sizes between and including 0.010” and 0.247” are available, up to tolerance. Non-plated holes may be any size. Limit number of holes to less than 50 per square inch.
Hole Tolerance These sizes are the finished hole diameters after plating. Holes 0.014” or smaller may be filled with solder and can only be used as via. The tolerance of 0.015” to 0.020” holes is +0.003 / -0.005. The tolerance for the other hole sizes are +/-0.003”.
Hole Location Tolerance Hole location tolerance is +/-0.003”.
Minimum Hole Distance The distance between plated holes of different nets is dictated by annular rings and trace/space. Plated holes of the same net and non-plated holes should be at least 0.005” apart.
Internal Slots and Cutouts Allowed
Perimeter Slots Board perimeters are cut to shape using a 0.078” router bit. Slots in the perimeter must be 0.100” or wider. Narrower slots may not be cut correctly.
Perimeter Routing The edges of the board are cut with an accuracy of +/-0.010”. A minimum of 0.020” blank space is recommended between the perimeter and all features on the board. Traces placed closer than 0.010” to the board’s edge may be routed off.
Temperature All boards can survive standard reflow, while RoHS compliant boards are able to survive RoHS reflow. The maximum operating temperature is 125 degrees C.
Electrical Test Optional
Other Controlled Impedance, Blind/Buried Vias, Countersinks/Counterbores, Arrays, Scoring, and Beveled Edges are NOT available with this product option. When required, please request a custom quote here.

Additional Resources

Design Rules Our standard design rules and standards assist PCB Designers with configuring basic design rule checks. Available Here
DFM Report Upload your PCB design files and receive an instant Design for Manufacturability (DFM) report. Our free, automated tool identifies possible production issues prior to manufacturing. Available Here
PCB Design Software PCB Creator is a free, easy-to-use PCB design software allowing for the design of 2 and 4 layer PCBs. Available Here
Online Tools We offer a variety of free online tools to assist you in the PCB design and manufacturing process including an Array Calculator, a Panelizer Tool, Material Library, Surface Finish Chart & More. Available Here
Blog Follow our Blog for helpful posts on PCB design. Available Here
Help Center Questions? Check our Help Center for self-service answers to common questions, or Submit a Request and we’ll be glad to help out! Available Here


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!