Loading... Please wait...

Same Day Prototype

  • Image 1
  • Image 2
Price:
$295.00
Only supports a few types. Maximum file size: 500 MB
Quantity:


Product Description

Same Day PCB Prototype

By ordering our Same Day PCB prototypes you can get your prototype PCB completed in record time. If you place your order by 7AM Pacific Standard Time, your prototype PCB order will ship the SAME DAY! Orders received after 7AM will ship the next day.

Please note that your prototype PCBs must meet the manufacturing specifications as outlined below.

Not finding what you're looking for? We'll generate a custom quote for you. Click here to get started!

Manufacturing Specifications

Quantity As many boards as fit within allotted space (160 square inches).
Layers 2 (or 1, if desired)
Lead Time 12 Hours. To learn more about how lead time is calculated, read this.
Maximum Board Size Maximum board dimension is 22.5 inches (maximum manufacturing capability).
Minimum Board Size Minimum dimension in height or width is 1 inch. Total board area must be greater than 1 square inch (i.e. smallest square board allowed is 1 x 1 inches).
Minimum Trace and Space Etching resolution is 0.008” minimum trace width, 0.008” minimum space width.
Inner Layers N/A. There are no inner layers for this product.
Soldermask None
Silkscreen None
Surface Finish HASL (Lead). Learn more about Surface Finishes.
Soldermask Pad Tolerance N/A
Material Dielectric material is FR-4 with a glass transition temperature of 135 degrees Celsius. Outer layers begin with 0.5 ounces of copper, then during through hole plating, up to 1 ounce of copper may be added to the outer layers. Thus, the total outer layer copper is between 0.0017" and 0.0021". If the board is 1 layer or does not have plated through holes, then the outer layer copper may be as low as 0.0014”, since less plating is required. The total board thickness will be 0.062".
Dielectric Constant The dielectric spacing 0.057” with a dielectric constant of 4.58 +/-0.2.
Annular Ring Minimum annular ring must be at 0.005” or greater.  Calculate annular ring by subtracting the diameter of the via hole from the diameter of the via pad and dividing by two.
Plated Holes Boards are manufactured with 2 (or 1) copper layers. All holes with copper pads on the top and bottom are plated through, while holes without a copper pad on the top or bottom layer are non-plated.
Hole Sizes & Quantity All hole sizes between and including 0.020” and 0.247” are available, up to tolerance. Limit number of holes to less than 50 per square inch.
Hole Tolerance These sizes are the finished hole diameters after plating. Holes 0.014” or smaller may be filled with solder and can only be used as via. The tolerance of 0.015” to 0.020” holes is +0.003 / -0.005. The tolerance for the other hole sizes are +/-0.003”.
Hole Location Tolerance Hole location tolerance is +/-0.003”.
Minimum Hole Distance The distance between plated holes of different nets is dictated by annular rings and trace/space. Plated holes of the same net and non-plated holes should be at least 0.005” apart.
Internal Slots and Cutouts Not Allowed
Perimeter Slots Not Allowed
Perimeter Routing The edges of the board are shear cut. A minimum of 0.020” blank space is recommended between the perimeter and all features on the board. Copper features, vias, and any other design element placed closer than 0.010” to the board’s edge may be routed off.
Temperature All boards can survive standard reflow, while RoHS compliant boards are able to survive RoHS reflow. The maximum operating temperature is 125 degrees C.
Electrical Test Not Available
Other Arrays (Tab Rout, Breakaway Tabs, Mouse Bites, etc), Beveled Edges, Blind/Buried Vias, Castellated Edges, Countersinks/Counterbores, Controlled Impedance, Edge Plating, and Scoring are NOT available with this product option. When required, please request a custom quote here.

Additional Resources

Design Rules Our standard design rules and standards assist PCB Designers with configuring basic design rule checks. Available Here
DFM Report Upload your PCB design files and receive an instant Design for Manufacturability (DFM) report. Our free, automated tool identifies possible production issues prior to manufacturing. Available Here
PCB Design Software PCB Creator is a free, easy-to-use PCB design software allowing for the design of 2 and 4 layer PCBs. Available Here
Online Tools We offer a variety of free online tools to assist you in the PCB design and manufacturing process including an Array Calculator, a Panelizer Tool, Material Library, Surface Finish Chart & More. Available Here
Blog Follow our Blog for helpful posts on PCB design. Available Here
Help Center Questions? Check our Help Center for self-service answers to common questions, or Submit a Request and we’ll be glad to help out! Available Here


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!