Get multiple quantities of your 2-layer PCB design with our Weekend Warrior Special. This web special allows customers to get as many boards will fit on a 9”x 12” panel, offering up to 90 square inches of usable space, shipped within 7 business days following the date the order is placed. Plus, you will receive an exclusive “PCB Design Genius” t-shirt!
Need help figuring out how many PCBs will fit on a 9" x 12" panel? Our Panelizer Tool can help you estimate how many boards will fit on a panel, including multiple parts with different sizes. The exact quantity you will receive may vary and cannot be guaranteed due to manufacturing yields and other unforeseen contributing factors.
Not finding what you're looking for? We'll generate a custom quote for you. Click here to get started!
|Quantity||As many boards as fit within allotted space (90 square inches).|
|Layers||2 (or 1, if desired)|
|Lead Time||7 Business Days with an option to expedite to 5 Business Days (2 Days Sooner). To learn more about how lead time is calculated, read this.|
|Maximum Board Size||Maximum board size must be less than 22.5 inches in height and 16.5 inches in width (maximum manufacturing capability).|
|Minimum Board Size||Minimum dimension in height or width is 0.35 inches. Total board area must be greater than 0.4 square inches (i.e. smallest square board allowed is 0.64 x 0.64 inches).|
|Minimum Trace and Space||Etching resolution is 0.005” minimum trace width, 0.005” minimum space width.|
|Inner Layers||N/A. There are no inner layers for this product.|
|Soldermask||Color = Green. Top and Bottom|
|Silkscreen||Color = White. Top and Bottom|
|Surface Finish||HASL (Lead), with option to upgrade to HASL (Lead Free), Immersion Silver, or Immersion Gold (ENIG). Learn more about Surface Finishes.|
|Soldermask Pad Tolerance||Pads on the soldermask layers are grown by 0.003” on all sides. As a result, very fine pitch surface mount components may not include any soldermask between the pins.|
|Material||Dielectric material is FR-4 with a glass transition temperature of 135 degrees Celsius. However, if a RoHS compliant surface finish is selected, then FR-4 with a glass transition temperature of 180 degrees Celsius will be used. Outer layers begin with 0.5 ounces of copper, then during through hole plating, up to 1 ounce of copper may be added to the outer layers. Thus, the total outer layer copper is between 0.0017" and 0.0021". If the board is 1 layer or does not have plated through holes, then the outer layer copper may be as low as 0.0014”, since less plating is required. The total board thickness will be 0.062".|
|Dielectric Constant||The dielectric spacing 0.057” with a dielectric constant of 4.58 +/-0.2.|
|Plated Holes||Boards are manufactured with 2 (or 1) copper layers. All holes with copper pads on the top and bottom are plated through, while holes without a copper pad on the top or bottom layer are non-plated.|
|Hole Sizes & Quantity||All hole sizes between and including 0.010” and 0.247” are available, up to tolerance. Limit number of holes to less than 50 per square inch.|
|Hole Tolerance||These sizes are the finished hole diameters after plating. Holes 0.014” or smaller may be filled with solder and can only be used as via. The tolerance of 0.015” to 0.020” holes is +0.003 / -0.005. The tolerance for the other hole sizes are +/-0.003”.|
|Hole Location Tolerance||Hole location tolerance is +/-0.003”.|
|Minimum Hole Distance||The distance between plated holes of different nets is dictated by annular rings and trace/space. Plated holes of the same net and non-plated holes should be at least 0.005” apart.|
|Internal Slots and Cutouts||Not Allowed|
|Perimeter Slots||Board perimeters are cut to shape using a 0.078” router bit. Slots in the perimeter must be 0.100” or wider. Narrower slots may not be cut correctly.|
|Perimeter Routing||The edges of the board are cut with an accuracy of +/-0.010”. A minimum of 0.020” blank space is recommended between the perimeter and all features on the board. Traces placed closer than 0.010” to the board’s edge may be routed off.|
|Temperature||All boards can survive standard reflow, while RoHS compliant boards are able to survive RoHS reflow. The maximum operating temperature is 125 degrees C.|
|Electrical Test||Not Available|
|Other||Controlled Impedance, Blind/Buried Vias, Countersinks/Counterbores, Arrays (Tab Rout, Breakaway Tabs, Mouse Bites, etc), Scoring, and Beveled Edges are NOT available with this product option. When required, please request a custom quote here.|
|Design Rules||Our standard design rules and standards assist PCB Designers with configuring basic design rule checks. Available Here|
|DFM Report||Upload your PCB design files and receive an instant Design for Manufacturability (DFM) report. Our free, automated tool identifies possible production issues prior to manufacturing. Available Here|
|PCB Design Software||PCB Creator is a free, easy-to-use PCB design software allowing for the design of 2 and 4 layer PCBs. Available Here|
|Online Tools||We offer a variety of free online tools to assist you in the PCB design and manufacturing process including an Array Calculator, a Panelizer Tool, Material Library, Surface Finish Chart & More. Available Here|
|Blog||Follow our Blog for helpful posts on PCB design. Available Here|
|Help Center||Questions? Check our Help Center for self-service answers to common questions, or Submit a Request and we’ll be glad to help out! Available Here|
Showing reviews 1-5 of 11 | Next
Posted by Brian on 15th Apr 2017
Everything was fast and easy.
Posted by Exact Research LLC on 19th Jul 2015
Very easy to submit gerbers for DFM, good tools and good communications. I will be coming back for sure!
Posted by The Dude on 16th Jul 2015
When I ordered, thought it was a little pricey , but they delivered with about double the small PCBs expected. Excellent quality and fast delivery. Good stuff. I will definitely be ordering again from BAC.
Posted by AbruptMedia, LLC on 29th Jun 2015
My boards were delivered on time and were of excellent quality. The price makes them very affordable. BAC's silkscreening was noticeably better than that produced by another PCB house that I use regularly -- and which costs more. I am very happy with the quality of them. Enough that I just placed orders for five more board designs!
One minor nitpick: There was only the small size T-shirt available when I placed my order (I don't fit into a small), and I didn't even receive it. The T-shirt offer is nice, but is really immaterial to my PCB order. However, if your going to offer it (and is a required field on the order form), make sure you include it.
Posted by Jim Zuber on 31st Jan 2015
My two layer boards look and work perfect. I was only expecting 12 boards, but got 18, a very nice surprise. Will be back for more! Thanks!
Showing reviews 1-5 of 11 | Next