Loading... Please wait...

Weekend Warrior

  • Image 1
Only supports a few types. Maximum file size: 500 MB

Product Description

Get multiple quantities of your 2-layer PCB design with our Weekend Warrior Special. This web special allows customers to get as many boards will fit on a 9”x 12” panel (Usable space equal to 8" x 11", or, 88 square inches), shipped within 7 business days following the date the order is placed.

Need help figuring out how many PCBs will fit on a 9" x 12" panel? Our Panelizer Tool can help you estimate how many boards will fit on a panel, including multiple parts with different sizes. The exact quantity you will receive may vary and cannot be guaranteed due to manufacturing yields and other unforeseen contributing factors.

Interested in a stencil to help with parts assembly? Check out our desktop stencil option here.

Not finding what you're looking for? We'll generate a custom quote for you. Click here to get started!

Manufacturing Specifications

Quantity As many boards as fit (single design) within allotted space (Usable space equal to 8" x 11", or, 88 square inches).
Layers 2 (or 1, if desired)
Lead Time 7 Business Days with an option to expedite to 5 Business Days (2 Days Sooner). To learn more about how lead time is calculated, read this.
Maximum Board Size Maximum board size must be less than 11 inches in height and 8 inches in width (maximum manufacturing capability).
Minimum Board Size Minimum dimension in height or width is 0.35 inches. Total board area must be greater than 0.4 square inches (i.e. smallest square board allowed is 0.64 x 0.64 inches).
Minimum Trace and Space Etching resolution is 0.005” minimum trace width, 0.005” minimum space width.
Inner Layers N/A. There are no inner layers for this product.
Soldermask Color = Green. Top and Bottom
Silkscreen Color = White. Top and Bottom
Surface Finish HASL (Lead), with option to upgrade to Immersion Silver, or Immersion Gold (ENIG). Learn more about Surface Finishes.
Soldermask Pad Tolerance Pads on the soldermask layers are grown by 0.003” on all sides. As a result, very fine pitch surface mount components may not include any soldermask between the pins.
Material Dielectric material is FR-4 with a glass transition temperature of 135 degrees Celsius. However, if a RoHS compliant surface finish is selected, then FR-4 with a glass transition temperature of 180 degrees Celsius will be used. Outer layers begin with 0.5 ounces of copper, then during through hole plating, up to 1 ounce of copper may be added to the outer layers. Thus, the total outer layer copper is between 0.0017" and 0.0021". If the board is 1 layer or does not have plated through holes, then the outer layer copper may be as low as 0.0014”, since less plating is required. The total board thickness will be as specified above, either 0.031", 0.062", 0.093", or 0.125".
Dielectric Constant The dielectric spacing 0.057” with a dielectric constant of 4.58 +/-0.2.
Annular Ring Minimum annular ring must be at 0.005” or greater.  Calculate annular ring by subtracting the diameter of the via hole from the diameter of the via pad and dividing by two.
Plated Holes Boards are manufactured with 2 (or 1) copper layers. All holes with copper pads on the top and bottom are plated through, while holes without a copper pad on the top or bottom layer are non-plated. Holes with a copper pad on one outer layer but not on the other are not accepted.
Hole Sizes & Quantity All hole sizes between and including 0.010” and 0.247” are available, up to tolerance. Limit number of holes to less than 50 per square inch.
Hole Tolerance These sizes are the finished hole diameters after plating. Holes 0.014” or smaller may be filled with solder and can only be used as via. The tolerance of 0.015” to 0.020” holes is +0.003 / -0.005. The tolerance for the other hole sizes are +/-0.003”.
Hole Location Tolerance Hole location tolerance is +/-0.003”.
Minimum Hole Distance The distance between plated holes of different nets is dictated by annular rings and trace/space. Plated holes of the same net and non-plated holes should be at least 0.005” apart.
Internal Slots and Cutouts Not Allowed
Perimeter Slots Board perimeters are cut to shape using a 0.078” router bit. Slots in the perimeter must be 0.100” or wider. Narrower slots may not be cut correctly.
Perimeter Routing The edges of the board are cut with an accuracy of +/-0.010”. A minimum of 0.020” blank space is recommended between the perimeter and all features on the board. Copper features, vias, and any other design element placed closer than 0.010” to the board’s edge may be routed off.
Temperature All boards can survive standard reflow, while RoHS compliant boards are able to survive RoHS reflow. The maximum operating temperature is 125 degrees C.
Electrical Test Not Available
Other Arrays (Tab Rout, Breakaway Tabs, Mouse Bites, etc), Beveled Edges, Blind/Buried Vias, Castellated Edges, Countersinks/Counterbores, Controlled Impedance, Edge Plating, and Scoring are NOT available with this product option. When required, please request a custom quote here.

Additional Resources

Design Rules Our standard design rules and standards assist PCB Designers with configuring basic design rule checks. Available Here
DFM Report Upload your PCB design files and receive an instant Design for Manufacturability (DFM) report. Our free, automated tool identifies possible production issues prior to manufacturing. Available Here
PCB Design Software PCB Creator is a free, easy-to-use PCB design software allowing for the design of 2 and 4 layer PCBs. Available Here
Online Tools We offer a variety of free online tools to assist you in the PCB design and manufacturing process including an Array Calculator, a Panelizer Tool, Material Library, Surface Finish Chart & More. Available Here
Blog Follow our Blog for helpful posts on PCB design. Available Here
Help Center Questions? Check our Help Center for self-service answers to common questions, or Submit a Request and we’ll be glad to help out! Available Here

Write your own product review

Product Reviews

Previous | Showing reviews 16-19 of 19

  1. Outstanding 5 Star Review

    Posted by on 13th Feb 2013

    I think this is an outstanding value. I thought that I was going to get a min of 7 boards but got 10!
    I have had a lot of boards made over the years as an embedded system design engineer.
    For work we get all the testing on the boards but these boards are so high quality there is no need for that. So the boards I got are for an Arduino 1284P Wise Clock that I'm working on. I also do this for a hobby. I have had boards made in Chine through other hobby venders and these boards are by far superior!

  2. Even more than I expected ! 5 Star Review

    Posted by on 8th Nov 2012

    I think this special is a great value. I expected 13 PCBs from the handy calculator and thought that was a good deal but then I received 14 boards, an even better deal. They look great and seem to work fine. I will use this service again. The delivery timeline was as advertised which is to say, pretty darn good.

  3. Excellent quality, price and delivery... 5 Star Review

    Posted by on 8th Nov 2012

    My only comments are "WOW". I have been doing quick turn boards/designs for 23 years and NEVER have I had better service, quality, value, and turn around time. I will be back again and again and again.

  4. You can't beat this offer !! 5 Star Review

    Posted by on 24th Oct 2012

    Great quality.
    Great price.
    No Problems.

    I occasionally order proto boards. I've got a file of board houses that offer a similar service. Nothing beats this offer!

Previous | Showing reviews 16-19 of 19